HEATING INSPECTION WITH GOSSETT



Gossett Heating and Air Conditioning, Inc. is a step above our competitors! Gossett believes in keeping customers informed/educated regarding the importance of having their heating systems inspected every year & professionally maintained to insure that you are getting the most out of your system.

 Remember, your heating /air conditioning system accounts for about 60% of your total utility bill.

It is important to have your heating system inspected yearly to avoid fire hazards.

Our Heating Inspections include the following:

1. Inspect Thermostat, cleanout, wiring, and connections where applicable

2. Inspect return air for leaks and cleanliness.

3. Light Pilot-check flame and adjust flame if necessary

4. Check and clean flame sensor rod where applicable

5. Check condition of hot surface igniter

6. Check electrical block, wiring, fuses, circuits, connectors, control board, and tighten where necessary

7. Check blower motor for bearing play

8. Check wheel for cleanliness and vibration as well as vacuuming the inside of the furnace (if necessary)

9. Check induced draft motor operation

10. Check and lubricate all moving parts where necessary

11. Check for adequate combustion air, and for good clearance of all combustibles

12. Check system for gas leaks

13. Check gas piping, flex connector, and stop valve to meet code

14. Check heat exchanger for cracks, damage, and corrosion where accessible

15. Check condition of burners remove and clean where necessary. Check for soot build up and the burner flame. Adjust for blue flames

16. Check operation of fan and limit control where applicable

17. Check operation of high temperature safety limit controls

18. Check for flame rollout or delayed ignition or unsafe condition

19. Turn System off check to see that gas control shuts off completely

20. Visual inspection of all readily accessible ductwork for leaks and condition

21. Check furnace flue pipe to ensure passes safety and state code requirements

A) Double wall vent pipe

B) Proper roof jack through roof

C) 1" clearance entire length

D) No sagging ducts, joints or leaks

22. Inspect evaporator coil (if accessible without dismantling) to chemically clean ($395.00 to $650.00). This is situational and needs to be discussed with your technician

23. We will ensure that you have proper return air for your square footage and system (if applicable)

We will change media filter & air filters for an extra charge (if applicable)