|
Gossett Heating & Air Conditioning, Inc. a step above our competitors! Gossett believes in keeping customers informed/educated regarding the importance of having their heating systems inspected every year & professionally maintained to insure they get the most out of their systems.
Type of Furnace ________
Apprx. Efficiency ________
1. Inspect Thermostat, cleanout, wiring and connections where applicable
2. Inspect return air for leaks and cleanliness. We will change media filter & air filters for an extra charge if applicable
3. Light Pilot-check flame and adjust flame if necessary
4. Check and clean flame sensor rod where applicable
5. Check condition of hot surface igniter
6. Check electrical block, wiring, fuses, circuits, connectors, control board and tighten where necessary
7. Check blower motor for bearing play
8. Check wheel for cleanliness and vibration
9. Check induced draft motor operation
10. Check and lubricate all moving parts where necessary
11. Check for adequate combustion air, and for good clearance of all combustibles
12. Check system for gas leaks
13. Check gas piping, flex connector and stop valve to meet code
14. Check heat exchanger for cracks, damage and corrosion where accessible
15. Check condition of burners remove and clean where necessary, check for soot build up and burner flame. Adjust for blue flames.
16. Check operation of fan and limit control where applicable
17. Check operation of high temperature safety limit controls
18. Check for flame rollout or delayed ignition or unsafe condition
19. Turn System off check to see that gas control shuts off completely
20. Visual inspection of all readily accessible ductwork for leaks and condition
21. Check furnace flue vent to ensure passes safety and state code requirements
A) Double wall vent pipe
B) Proper roof jack through roof
C) 1" clearance entire length
D) No sagging joints or leaks
22. Recommend access door
23. Recommend evaporator coil cleaning
24. Recommend adding return air
|